Steps to painting furniture
Give new life to a flea market find or rescue that aubergine end table from consignment to the curb with some simple preparation and a new paint job. Unfinished wood furniture is even easier to transform into a showpiece. You'll need a little time and an undisturbed workspace protected from dust and other dirt that could ruin the finish of wet paint. But painting furniture is one of the easiest decorating jobs you can tackle.
Sand
The first step is sanding. Unpainted wood furniture needs the lightest touch. Furniture to be repainted needs more serious sanding. The idea is to smooth out any bumps or imperfections and rough up the surface to give some "tooth" for the new paint to grab. Sanding is done with fine sandpaper--about 100 to 120 grit. When the piece is sanded, it has to be wiped down with a clean rag or vacuumed to remove all the dust and grit.
Prime
Some people skip this step and that is rarely a good idea. Primer is the real canvas for the final paint job. It gives a smooth surface for the topcoat to adhere to and evens out the color. Prime with a white or light-colored primer. One thin coat should do but a second, equally thin coat can be applied if needed. Some painters like to use oil-based primer for furniture, claiming it seals the piece better so no old color or other stains can show through the final coat of paint. Others stick with water-based primer, which is easier to use and clean up. Whichever primer is selected, the piece has to dry completely before the next step.
Paint
Paint the furniture--latex paint will work well over either oil-based or water-based primer. Painting can be done with a brush, roller or sprayer. A rule of thumb is to paint inside surfaces first and outside surfaces from the top down. If using a brush, the paint must be applied in even strokes that cover every corner, edge and scroll. If using spray paint or a sprayer, the paint should go on in slow sweeps. The sprayer should be held about a foot from the furniture so the paint falls on the piece in an even mist and doesn't run or drip. If a second coat is needed, the piece has to dry thoroughly first.
Seal and Protect
One or two coats of clear lacquer finish will keep the paint job looking new and make it easier to wipe down. Water-based polyurethane leaves a glossy shine on the piece. There are clear matte finishes that will work, too. The extra finish minimizes chips, scratches, dings and stains. The painted furniture should dry for a day or so before it is used or heavy objects are placed on it to give the paint a chance to harden, especially in humid conditions.
Related posts
Paint an exterior door to protect the wood.Choose a paint designed to be used outdoors for your new door; exterior paint will offer extra protection from the elements. If your new wood door has co...
Updating the color of the walls will transform the look and feel of a room. Whether you are painting every room in your house or just one accent wall to highlight a prized piece of art or an antiq...
Redoing furniture, such as by painting, is one of the best ways to achieve a brand-new look without spending a lot of money. With so many painting options available, it is essential to have a gene...
Preparing walls is important whether painting over gloss or not.Painting over glossy paint is not that different from painting over flat or semi-gloss paint. The goal is to get the new paint to st...
Outdoor Metal FurnitureTransform your old metal outdoor furniture with a fresh coat of paint. Painting metal outdoor furniture is simply a process of proper cleaning techniques, followed by an app...
