Cherry wood is used for many different types of home furnishings, such as kitchen cabinets, dining-room sets, bedroom furniture and occasional tables. Cherry wood is very durable and dense, which means it is very long-lasting. If you want a new look for your cherry wood furniture or if your wood is chipped or damaged in some way, painting is always an option.
Instructions
Preparation
1. Prepare a well-ventilated area for this painting project. Garages and unfinished basements with large windows are good options. If you will be painting kitchen cabinets, keep all windows open for fresh air flow.
2. Wash your furniture well so that there is no dirt or grime on the surface. This is especially important if you are refinishing kitchen cabinets, since they often get sticky.
3. Remove all doors from cabinets or drawers from dressers, along with knobs and hinges. Place the doors and drawers on a separate worktable.
4. Sand the surface of the existing finish using a hand sander and 220 grit sandpaper so the paint will adhere well. Always sand in the direction of the grain; going against the grain will scratch the wood, which will show even under paint.
5. Wipe away all dust from the sanding with a tack cloth. Dust left on the furniture can result in a bumpy finish.
Priming and Painting
6. Apply one coat of a stain-blocking primer using a 3- or 4-inch foam brush. Paint in the direction of the grain. Allow the primer to dry completely (two to three hours on average). The primer will keep the old finish from seeping through as well as prevent knots from showing through.
7. Apply your first coat of latex paint using a foam brush. Allow the paint to dry and cure for three to five hours.
8. Buff your furniture after the first coat of paint is dry. Wipe down with a tack cloth.
9. Apply a second coat of paint. Allow to dry three to five hours.
10. Add a third coat of paint if you are using a white or light-color paint, if needed. Darker colors tend to cover with fewer coats. Using primer usually alleviates the need for a third coat.
Top Coat
11. Apply a coat of polyurethane (oil- or water-based) to your furniture using a foam brush. Polyurethane is very difficult to fix once it has dried, so apply a thin coat to cut back on the drips. Allow it to dry for 24 hours.
12. Apply a second coat of polyurethane. Allow it to dry for 24 hours.
13. Replace all hinges and knobs. Hang doors back on cabinets and replace drawers.
Related posts
A crackled paint finish can add an antique element to ordinary furniture.Craquelure is a classic faux finish that gives newly painted surfaces the finely crackled appearance common to many fine an...
Before you spray-paint your wood furniture, prepare the wood surface. Getting your wood furniture ready for paint is not a difficult process, but it is the most important. Your paint job will not...
Painted Armoire and DresserDo you have old furniture that needs a fresh look? Or is your furniture just not looking as appealing as it use to? Buying brand new furniture isn't always an affordable...
Do not paint bare wood lap siding without priming it, first.Wood lap siding is a popular choice for many homes because its overlapping construction style provides a classic look while allowing the...
It's easy to be disappointed when you spend money on quality paint, and then take up a couple of hours of your valuable time on a wood-painting project, only to be displeased with the results. The...
