Painting vinyl is an inexpensive option, particularly when compared to buying tinted panels to fit over the door's surface. If you were to paint a vinyl door with normal exterior paint, it would peel and chip very quickly, especially with frequent use and exposure to the elements. Painting a vinyl door requires the use of a primer containing a bonding agent, followed by coats of a special latex paint containing a bonding agent. The special primer and paint trigger a chemical reaction that essentially melts the surface of the door, allowing the primer and paint to bond with the vinyl surface to create a durable finish.
Instructions
Preparing the Door for Paint
1. Rinse the door with a hose to remove superficial dirt and debris.
2. Remove the door from its hinges using a screwdriver. Lay the door flat on a drop cloth.
3. Remove the door handle by removing the two screws on the base around the handle. If you don't want to remove the handle, you can cover it with a plastic bag using painter's tape or masking tape to secure the bag and to cover any exposed areas of metal.
4. Place a few drops of dish soap in a bucket, fill the bucket with warm water and sponge the soapy water onto the door. The dish soap will remove dirt and will break up oils that are present on the door.
5. Scrub the door with a scrub brush, using a circular motion to remove dirt and grime. Most vinyl doors have a faux wood texture, so scrubbing is required to remove dirt from these indentations.
6. Rinse the door with a hose and allow the door to air dry before proceeding.
Priming the Door
7. Don a face mask or respirator to avoid inhaling primer and paint fumes.
8. Place a liner inside the paint tray, stir the primer-bonder and pour some into the tray, enough to cover the bottom of the reservoir situated at the lower end of the tray.
9. Apply an even coat of primer-bonder to the door's surface. Allow the door to dry before proceeding. The recommended drying time varies among products, so read the label to determine how long you need to wait before painting.
10. Pour remaining primer-bonder into the canister and dispose of the tray liner and roller. Replace with a new paint roller and a new paint tray liner.
Painting the Door
11. Stir the paint before pouring it into the tray.
12. Paint the door, applying a thin, even coat. If a second coat is recommended (read the product label), allow the first coat to dry first.
13. Place the door back on its hinges, and replace the door handle once the paint has dried. Avoid using the door until the paint has set. Setting usually takes 36 to 72 hours. Read the product label to determine the setting time.
Related posts
Properly painted door trim can last for years.Exterior wood trim on doors needs to be prepared properly before painting. Bare wood is porous, and finish paint soaks in. This soaking-in process can...
Never paint over a vinyl wall without abrading it with sandpaper.If you plan to paint over a vinyl wall, there are a pair of important factors you will need to consider before you get started. Fir...
Create a welcoming entryway to your home with a red door.A brightly colored front door creates a welcoming entrance, says Jill Blake, author of "Healthy Home," and a front door painted r...
A roller used to apply paint to large areasA vinyl door is capable of receiving paint if the proper preparations are made. Smooth and high-gloss vinyl may require light sanding work before coating...
Paint an exterior door to protect the wood.Choose a paint designed to be used outdoors for your new door; exterior paint will offer extra protection from the elements. If your new wood door has co...
