A nice paint job on a carburetor is often the first thing people notice on the engine of a classic car or motorcycle.
Painting a carburetor involves some careful steps to ensure proper adhesion, durability and look of the final product. For some classic and vintage car owners, it is also essential to refinish the vehicle to exact specifications or use as close to original materials whenever possible. Take care to prepare the surface of the carburetor and use the right materials to paint it, and your carburetor could look as good as new when you complete the paint job.
Instructions
1. Clean and prepare the surface of the carburetor. For rust and corrosion issues, use the wire brush, sponge and sandpaper to loosen any flakes and bring the metal back to the bare, smooth surface. The edges between the painted area and the bare metal should be hard to distinguish when you run a bare hand over the area. Apply a little dab of carburetor cleaner to the steel wool sponge, and wipe the surface in tight circles. Clean up any dust and debris with a shop vacuum, and wipe the carburetor one last time with carburetor cleaner and a clean rag.
2. Tape all areas of the carburetor that you do not want paint on or in. The painter's tape should be carefully applied so it does not cover any area that needs paint. Open your carburetor primer can, and use one of the angle brushes to apply the primer to all rusted and bare spots. Primer should be applied anywhere the existing finish has been scuffed. Let the primer dry.
3. Open the can of paint. Be sure you've chosen an oxide paint that is heat resistant and approved for use on carburetors. The most common carburetor colors are black, chrome and silver. Using your other angle brush, paint the surface with an even coat, leaving no streaks, drips or runs. Use quick, light strokes to get the best results. Let this coat dry, and inspect the results. If necessary, apply another light coat or touch up areas before you remove the tape.
Related posts
Adding a clear coat to a paint job will provide protection from normal wear and tear, scratches or gouges, but that's not the only benefit. You can also change the appearance of your paint by appl...
Many people look to save money by doing their own home improvement projects. The most common project that homeowners undertake, and one of the more difficult to get right, is painting. While some...
Verdigris is the light greenish coating that develops on copper.Verdigris is the bluish-green coating that copper and copper alloys develop when exposed to acetic acid over time. Although used in...
Whitewall tires look classy but can be expensive--unless you paint your own.Depending on the make and model of your vehicle, whitewall tires, especially wide whitewall tires, can look extremely tr...
A quality paint job can enhance the appearance of your car. However, hiring a professional could cost you anywhere from $300 to $1,000. Even though it costs less to do it yourself, some people fea...
