Do you see indoor condensation and the unsightly appearance of mold
and mildew on your walls? Warm and moist air, inadequate wall insulation,
improper wall construction and lack of ventilation are at the
heart of this issue.
Instructions
Exhaust excessive moist air
1. Install an exhaust fan in bathrooms. If you have access from above (an attic), install the fan in the ceiling and vent it out the nearest attic wall. If there is no wall within the limits suggested by the fan's manufacturer, vent the fan through a roof.
2. If you have a bathroom fan, operate it for 20 minutes after showering. Replace the standard switch with a timer control to make this easier (see Swap a Faulty Light Switch).
3. Cut down the bathroom door if the gap underneath is much less than 1 inch (2.5 cm). You need that much to provide adequate air for the exhaust fan. See Fix a Rubbing Door.
4. Vent clothes dryers to outdoors. You can easily install throughwall kits in most walls. Use rigid aluminum duct, which is easy to cut, assemble and connect.
5. Vent kitchen fans to outdoors and use them whenever you boil water, wash dishes or run the dishwasher.
Tighten a leaky exterior wall
6. Seal switch and receptacle outlets with foam gaskets (energy savers).
7. Caulk joints between floors and walls and around the inside and outside of windows or exterior walls.
8. If there is no vapor retarder (polyethylene sheeting or facing on insulation), make sure there are two coats of good-quality paint on the walls. To see if an exterior wall has a vapor retarder, remove an electrical outlet cover to explore the outside of the box.
9. In bathrooms the problem may be so bad that as a last resort you must remove finished walls to install a proper retarder.
10. Insulate the walls and/or ceilings (see a related problem and the solution in Prevent Ice Dams).
Remove existing mold
11. When you feel you've resolved the problem, wash the affected surfaces with a homemade bleach solution; see Remove Mildew From Walls and Ceilings.
Related posts
Mold on walls and ceilings may seem like a simple eyesore but they can quickly turn into a health hazard. Various forms of household mold can cause allergic reactions, asthma and other respiratory...
Remove Old Paint From Interior WallsBefore renewing the look of a room, old paint from the walls often needs to be removed. A fresh new coat or color can add to the overall aesthetic and dimension...
Use white paint to show off the texture of the brick.Exposed brick walls are charming in their own way. In urban apartments, they are like a badge of honor that proudly announce, "this apartm...
Wall colors work in conjunction with a room's décor and furnishings to create a specific atmosphere.The décor on a wall serves both to accent and to define a room's purpose, alon...
Priming interior walls is essential before painting.Painting interior walls is one of the easiest ways to improve the look and value of your home. Whether you've decided to go with a new d cor, a...
