Monday, March 31, 2014

Setting up Vinyl Siding On Stucco

Vinyl siding changes the appearance of any home.


When you finally tire of trying to make that stucco on the house look great, you tire of the annual power washes or you just want a change, then it's time for vinyl siding on the stucco. You can actually install it yourself. It takes some time, but the results are worth the effort.


Instructions


1. Assess the stucco. If the stucco is crumbly and in extremely poor shape, you might consider removing it. Use either a hammer with the widest cold chisel available or an SDS rotary hammer with the biggest chisel bit available. This saves your body from a lot of stress.


2. Strip it out if your stucco is in good repair. Stripping it out is a term for putting boards all the way around the house at 16-inch intervals. Before you begin, make sure the walls are level. A level surface is important to the success of siding. If your walls aren't level, adjust the height of the boards with shims to make them level.


3. Start with the flashing and a weather barrier, if you use one, before you begin. Flashing stops the flow of water where the siding butts up against adjoining material. Use the flashing and type of nail that the manufacturer recommends.


4. Install the accessories. Start by installing the corner posts, window flashing, trim and J-channels. If you're going to paint the trim, do that now, before you put on the siding or accessories. Use a level on each.


5. Begin the starter strips. Make certain that the siding starts level. To do this, mark a point on the wall where you want the siding to start. Measure up 1/4 inch less than the starter strip's width and mark the spot by pounding in a nail. Tie a chalk line to the nail, level it out with a 4-foot level and snap the chalk line. Continue around the house until you complete all lines for the starter strips.


6. Nail or screw the siding down loosely. You need to allow the vinyl siding to slide so it can expand and contract freely. The same is true of the accessories like the J-channels.


7. Vary the seams on the siding by alternating the short pieces on each end in different rows.









Related posts



    Hang Vinyl SidingStop painting your house every couple of years, and make it maintenance free with vinyl siding.A lot of people don't realize how simple it is to hang vinyl siding on their house a...
    Putting up vinyl siding is a great way to improve the look of your home. Without the hassle of having to paint year after year you will also save money. Lets take a look at the right way to hang v...
    Knowing apply vinyl siding over wood siding can save you time and money when you are doing exterior remodeling. But there are some things that you will want to take into consideration. Some factor...
    Only basic hand tools are necessary for installation.Vinyl siding is popular because it is maintenance-free and easy for almost anyone to install. Installation is relatively simple. The challenge...
    Choose a bright trim color for a home with neutral-colored vinyl siding.Finding the right trim color for a house with brick and vinyl siding can be tricky. Matching your trim to a single color is...