Sunday, February 23, 2014

Spray Siding Stain

You've just finished covering your home with a quality wood siding. It looks great, and now it needs to be protected. Penetrating oil-based stain can be applied with a brush, roller, or sprayer. Using a sprayer is the fastest way to apply stain to siding. However, spraying stain requires specific conditions and provides unique challenges. There are a few tips and tricks that can help you to achieve an attractive and lasting finish for your wood siding.


Instructions


1. Make sure you have the right conditions for spraying. It should be done on a relatively moderate, dry, wind-free day. Temperatures over 90 degrees Fahrenheit can cause the stain to dry too quickly and form a tacky coating on the surface of the wood. Moisture can also prevent stain from penetrating. Wind will cause your spray to blow all over the place. If you aren't careful you can end up staining your neighbor's' house along with yours.


2. Mask off anything you don't want stained. Use masking tape and sheet plastic to cover windows, doors, and fixtures.


3. Get the right sized tip for the job. You will want to spray along the length of each siding board. Pick a tip that will create a spray pattern as wide as one or two boards. Tips are numbered. A "411" tip, for example, creates a spray pattern of 8 inches when the tip is held one foot away from the siding surface. A "611" tip creates a spray pattern 12 inches wide when held one foot away.


4. Adjust the pressure on the sprayer. Lower pressure, between 800 and 1000 psi, will provide you with good control. By cranking up the pressure you run the risk of over-spray.


5. Apply a generous amount of stain and work it in with a brush. It is helpful to have a partner who can follow behind you as you spray and use a paint brush to work the stain in and remove the excess product.









Related posts



    You must properly seal exterior wood siding on a home with a wood stain so that water cannot seep into the wood because it would eventually cause the wood to rot. The only way to fix rotted wood s...
    Vinyl siding is durable, easy to keep looking good, and holds its color well. It looks as good as new with a thorough washing once a year. But sometimes stains can discolor your vinyl siding and c...
    Vinyl siding is easy to maintain and holds color well. With a good washing once a year, it looks as good as new. But sometimes rust, green copper stains, tar, mold and other stains can discolor yo...
    Spray clean vinyl siding with a garden hose.Vinyl siding is known for low cost and maintenance. Wood siding needs sealed annually and painted surfaces dull quickly. Eventually, however, vinyl sidi...
    High-grade redwood heartwood lap siding is an excellent material choice for painted or solid color stained exteriors. The use of a quality primer and finish will result in a surface that will easi...