Wednesday, February 26, 2014

Fresh paint Over Stained Redwood Siding

Painted wood siding can really stand out.


Many homeowners with wood siding eventually decide that they would like a change. Perhaps you are tired of the natural wood look, or maybe you feel that your home would have more curb appeal in a brighter color. Whatever your reason for painting the house, careful preparation is the key to successfully painting over a wood stain.


Condition


Assess the current condition of the wood stain. If the siding is peeling or flaking, painting over it will only make the problem worse. Dull or faded patches require a bit of extra primer and paint but are much easier to cover than peeling or flaking.


Preparation


Thoroughly remove all areas of loose stain. For best results, work back and forth with a paint scraper and a sander. Use the scraper to remove as much peeling stain as possible, and then use the sander to make the surface smooth. You do not need to remove all of the stain, just the parts that are loose.


Pressure wash the entire house to remove dirt and debris, using a low setting to avoid damage. Check for stains that may have been loosened in the process, and repeat any scraping or sanding as necessary. Patch nail holes and other imperfections, caulk all seams, and sand smooth. The goal is a smooth, clean surface that will absorb the paint.


Primer


Choose a thick, stain-blocking primer. Oil-based primers are traditional but emit volatile organic compounds, or VOCs. Latex primers are more environmentally friendly and give off significantly less pungent odors. The stain-blocking additives seal both the wood stain and the natural tannins of the redwood, preventing leaks through the new paint. Use a roller or brush for priming, even if you plan to use a sprayer to apply the paint.


Painting


Apply at least two coats of thick latex exterior paint. Work in sections, such as window to window or door to door, to minimize lap lines between painting sessions. Apply the full first coat and allow the house to dry for at least 24 hours before starting the second coat. Slightly overlap each new section with the previously painted section to avoid thin spots or seams where the old stain could show through.



Related posts



    High-grade redwood heartwood lap siding is an excellent material choice for painted or solid color stained exteriors. The use of a quality primer and finish will result in a surface that will easi...
    Painting cedar lap siding on your house will undoubtedly enhance its appearance even as it protects the siding from natural elements. Although cedar is naturally rot resistant, painting it ostensi...
    Careful preparation of the surface will help paint adhere properly.Painting your house can be a big job that requires time and effort, as well as proper painting techniques, to ensure that the tas...
    You thought you had the problem resolved when you hired a contractor to paint your wood siding. But, days after the contractor is finished you notice that your new paint job is bubbling and peelin...
    Do not paint bare wood lap siding without priming it, first.Wood lap siding is a popular choice for many homes because its overlapping construction style provides a classic look while allowing the...