Making a newer brick wall look old can give a classy historical look to your home or business by using distressing techniques. These methods can be used with both standard brick or brick veneer, sometimes wrongly called faux brick. Brick veneer are small thin bricks which can be adhered to another surface for the look of a brick wall. Either type of brick can be given a weathered antique appearance, for interior or exterior walls.
Instructions
During Construction
1. Place a few bricks in one or two areas a little bit off-kilter if you are actually building a wall. This effect must be subtle, because you want it to look like the wall has settled somewhat, not like the original job was sloppy.
2. Break or chip some of the bricks with a hammer and chisel, mainly at the edges before adhering them. This can be done with an existing wall also.
3. Use antique salvage bricks instead of new ones, or include some darker-colored bricks for an irregular look.
Plaster
4. Plaster over part or all of the brick wall and then remove some of the plaster with a hammer and chisel, to make it look like the plaster has weathered away from the brick. This gives the exposed brick an old look.
5. Use lightweight plaster, which you can purchase in buckets at home improvement stores. Apply the plaster in a smooth layer with a small trowel, deciding whether you want a thin layer which shows more of the brick structure, or a thicker layer of around 3/4-inch which hides it. Since some of the plaster will remain, this consideration is important for your overall effect.
6. Allow the plaster to dry for at least 3 or 4 days. Normally people leave plaster dry for several weeks because they plan to paint over it, and must avoid trapping any moisture behind the paint. Since you're going to remove the plaster, it does not need the extra time to dry.
7. Enclose the area with polyethylene sheeting if the wall is indoors, to prevent dust from reaching other rooms when you remove the plaster.
8. Remove as much plaster as you want with the hammer and chisel. Misting the plaster with water first or applying water with a sponge can make it easier to remove.
Painting and Paint Removal
9. Paint the wall, with the intention of removing most of the paint afterward. Often this is done using white paint for a whitewashed look, although you can choose any color you like. The amount of paint you leave on the wall is up to you, and you'll want the color to blend with other exterior or interior design.
10. Coat the wall with the paint stripper (such as Peel Away) and leave it for the amount of time recommended.
11. Remove the softened paint by placing fabric strips on the material and peeling them off. Stubborn paint areas may need a stiff bristle brush, but not a wire brush unless you are willing to risk some obvious damage to the brick. Another way to remove the paint is with a heat gun.
Related posts
Test color combinations and practice tecniques on scrap wood for best results.Not every kind of decor benefits from a fresh clean coat of paint. If your room is rustic, shabby chic or has an old w...
Bright blues and textured paints can make the room seem larger.Most people tend to think that lighter colors make a room look larger. However, many designers suggest paint ideas that are just the...
Removing paint from brick walls will require elbow grease and patience.Brick absorbs paint, so getting the paint off this material is tricky. There a number of ways to remove it, from blasting, to...
Paint your walls to look like they're candy-coated.If you want to add a bright splash of color to the walls in your home, you can try replicating the colors of your favorite piece of candy. Most c...
Use some visual tricks and the right paint to add a spacious feel to a room.When decorating or redecorating a space that may not be as large as you like, changing the wall color can create the ill...
