Wednesday, November 27, 2013

What Can Cause Vinyl Siding To Buckle

Vinyl siding can warp or buckle for different reasons


Vinyl siding is a common exterior used on homes because it requires less maintenance than wood. This low-maintenance material is easy to install and periodically needs cleaning. Warped or buckled vinyl siding cannot be repaired because once it is warped it will continue to hold that shape. The warping can be caused by a few problems and once a section is warped, that section needs replacement.


Painted


A common cause of warped or buckled vinyl siding is repainting the original vinyl siding. The use of a darker color paint than the original color of the vinyl siding causes the siding to warp in different places. Dark color retains heat from the sun causing the temperature of the vinyl to rise and buckle because of the intense temperature. This intense temperature makes the vinyl expand and once the vinyl siding expands it cannot return to its original shape creating a warp in the siding. A homeowner that wants to repaint vinyl siding needs to use a color that is slightly darker than the original or use the original color.


Inproper Installation


Improper installation of vinyl siding causes it to warp or buckle. Vinyl siding that has been nailed too tightly will begin to buckle in a short time. The siding does not have enough room to move with the changing climate. The siding can move a 1/4" from side-to-side when nailed properly. The nails should not be driven through the vinyl siding. The vinyl siding has nail holes located at the top of each piece and run the length of the siding.


Old Vinyl Siding


Over time the vinyl siding will begin to warp because it is old. Weather conditions cause vinyl siding to expand and contract throughout the year depending on the temperature. It is like continually stretching a rubber band, after stretching the rubber band so many times, the rubber band does not contract back to its regular shape. The vinyl siding does the same thing, when the siding does not contract to its original shape it will begin to warp or buckle.


Extreme Conditions


Extreme weather conditions can also cause the vinyl siding to warp or buckle. Vinyl siding that is exposed to extremely cold temperatures for a long period of time can become brittle and warp. The same is true for extremely hot temperatures. Even though this is rare, prolonged weather conditions can damage the siding and cause the siding to warp in place. Cold temperatures causes vinyl siding to contract, while hot temperatures cause vinyl siding to expand. Vinyl siding that remains in a contracted or expanded condition for long periods of time will not go back to its original shape creating a warp or buckle.









Related posts



    Vinyl siding can last for decades, but in some cases, you may tire of the color long before it is time to re-side your house. While it is not always easy, you can paint vinyl siding to change the...
    Vinyl siding changes the appearance of any home.When you finally tire of trying to make that stucco on the house look great, you tire of the annual power washes or you just want a change, then it'...
    Don't forget the ladder!Like the sound of "low maintenance"? Then you'll appreciate siding made from polyvinyl chloride. The only upkeep that vinyl siding requires is a good cleaning onc...
    Vinyl siding must be painted properly to prevent damage.Painting vinyl siding is a cost effective way of revitalizing the exterior of a home. A new color changes the look of a home and the home lo...
    White vinyl siding can be difficult to paint because it contracts and expands depending on the weather. Because of this, the paint can chip and break off if applied improperly. All the work you pu...