Wooden beds can be painted just about any color.
Strong, simple and versatile, a wooden bed is a popular option that complements many bedroom styles. Some of the more prominent types of wood used in bed construction are pine, oak and cedar. Although the wood can be quite handsome, some people prefer to paint it, which is not difficult. Preparing the wood ensures a perfect foundation upon which the paint will remain for years to come.
Instructions
1. Use medium-grit sandpaper first.
Go over the wood with medium-grit sandpaper. Sand with the grain of the wood.
2. Remove wood dust with a tack cloth. Sand the bed again, this time using a fine-grain sandpaper. Remove wood dust with the tack cloth.
3. Look for holes left by knots and other imperfections in the frame. These must be filled with wood putty or wood filler. After the indentations have been found and made dust-free, open a can of filler that matches the wood.
4. Use a putty knife to apply wood filler.
Use a putty knife to scoop out a small amount of wood putty, and gently apply it to the indentations. Run the putty knife over the putty at a 45-degree angle to smooth it out and ensure complete coverage. Do this until the indentations are no longer visible. Allow the putty to dry according to the manufacturer's directions.
5. Go over the dried putty with fine-grit sandpaper. Remove any dust with a tack cloth.
6. Old newspapers make an adequate drop cloth.
Spread old newspapers or a drop cloth beneath the wooden bed before applying primer.
7. Apply a coat of wood primer, following the manufacturer's directions. Select a tint that is light if you are painting your bed a light color such as white or yellow. Choose a darker primer if the color you've selected is dark, such as red, navy blue or black. Allow the primer to dry according to manufacturer's directions.
8. Determine how shiny you want your paint to be.
Choose your paint. Indoor latex is easy to work with and easy to clean up. Enamel creates a harder coat of paint but requires paint thinner and/or turpentine for cleanup. A glossy finish is very shiny. A matte finish has no shine at all. A satin finish produces has a subtle shine.
9. Smaller brushes get into tight areas.
Mix the paint you've selected vigorously by stirring upward with a wooden paint stirrer. Using a clean wide paint brush, apply the paint in broad but even strokes. Use a smaller paintbrush in corners or other tough-to-reach areas.
10. Allow the paint to dry. Many times a single coat of paint is sufficient. If a second coat is needed, read the directions for drying times, and apply another coat.
11. Let the paint dry.
Related posts
It's easy to be disappointed when you spend money on quality paint, and then take up a couple of hours of your valuable time on a wood-painting project, only to be displeased with the results. The...
If you have dark walnut kitchen cabinets and tire of the dark finish, painting them is a simple way to brighten and redecorate your kitchen. With new cabinets costing thousands of dollars, paintin...
Restore an old brass door knocker with a simple paint job.Shiny, lacquered brass was once popular for many home accessories, especially lighting fixtures such as lamps and chandeliers. As this fin...
Properly refinish a wooden door to restore its appearance.The majority of doors in a typical house are constructed of wood. It proves the most efficient and practical material for household doors...
Painted maple cabinetsLike most kitchen cabinets, maple cabinets can become tired looking after much wear and tear. Painting maple cabinets will give them new life. Homeowners can paint their mapl...
