Wednesday, January 29, 2014

Fresh paint Rooms With Rounded Corners

Create a straight transition line on a rounded corner.


Rounded wall corners are common in new construction houses. During construction, the drywall contractor uses a special rounded form, fitted on top of the rough drywall panel edges, that will form a smooth curve when taped out. While rounded corners soften the transition from one room to the next on open doorways, they present a dilemma for homeowners who want to paint the connecting room a different color.


Instructions


Creating a Division Line


1. Select the room that will serve as your main room when a creating paint division line. For example, if your kitchen has a small attached breakfast nook, the nook is the secondary room and the kitchen (because it has more traffic) will serve as the main room.


2. Locate the rounded wall corner just inside the secondary room, and insert a push pin at the top of the corner just as the corner flattens out. Stick another push pin in the bottom of the wall at the same place.


3. Tie a string between the two push pins and use a carpenter's level to ensure that the string is perfectly straight. Adjust the pins if needed.


4. Apply a strip of painter's tape along the string line. Remove the pins and the string before painting, but leave the tape in place.


5. Apply painter's tape to the ceiling and on wood trim to protect these areas from stray paint.


Painting the Walls


6. Paint the secondary room first and paint the main room later.


7. Roll one coat of primer and two coats of wall paint on the walls with a medium-nap roller. Roll to within a couple of inches of the ceiling, door trim and the baseboard. Roll right up to the painter's tape that forms the paint division line, but do not roll over the tape.


8. Use a high-quality paintbrush to apply a thin coat of paint along the painter's tape edge. Wipe excess paint from your brush before painting along the tape to avoid pushing paint under the tape.


9. Cut in along the taped ceiling and baseboard with the paintbrush, using light, even strokes. Let the paint dry completely between coats.


Repositioning the Tape


10. Hold a straight edge along the edge of the tape and score the wall very lightly, just enough to cut the surface of the dried paint. If you pull the tape off without scoring the paint, you could pull off bits of the new paint.


11. Attach another piece of painter's tape directly over the line created when you removed the first tape.


12. Paint the main room the same way you painted the secondary room. When you come to the rounded corners, use your roller to roll on a light coating of paint, but don't use pressure to avoid getting paint beneath the tape.


13. Remove the tape as you did before, and you'll have a straight transition line that won't be seen from your main room.









Related posts



    Paint bucket with paintbrush on painter's plasticYou are ready to paint a room, but you have never painted one before. By understanding some basic steps you can prepare a room to in order to paint...
    Many factors go into choosing paint colors.The choice of paint colors plays a significant role in shaping the feel of a room. It sets the tone and determines how the decor in that particular room...
    Painter's tape is a key tool when painting your room two colors.Using more than one paint color in a room can give it a definitive personality; however, choosing the color combination and then app...
    To paint a living room or den you need to purchase materials for painting.Give drab walls a burst of color and transform your living room and den with a coat of paint. Buy proper painting supplies...
    Gray is a wonderful neutral that comes in many different tones, giving it great versatility. When designing a room with gray paint, several factors must be taken into consideration before choosing...