Wednesday, October 2, 2013

Fresh paint Whitewall Tires

Whitewall tires look classy but can be expensive--unless you paint your own.


Depending on the make and model of your vehicle, whitewall tires, especially wide whitewall tires, can look extremely trendy and classy. They can also be extremely expensive. The good news is, any standard black wall tire can be made to look like a whitewall tire with a bit of effort.


Instructions


1. Clean your tires well. Hose them off and then use dish soap, water and a rag to thoroughly clean them. Rinse them well with a hose and allow them to dry. Next, spray on an ammonia-based cleaner, wipe and allow to dry.


2. Remove one or more tires and wheels from your vehicle and lay the tire on a flat surface with the outside of the tire (the visible part when the tires is mounted on your vehicle) up.


3. Use inch-wide flexible masking tape (available at most home improvement centers and auto supply stores) to mask off approximately one inch of the tire near the tread edge of the tire. There is a slightly raised line on most tires marking the beginning of the tread, and this line is the one you should follow when masking your tire.


4. Mask off the junction of your tire and your metal rims. Cover the rims, leaving the tires open for painting.


5. Open and stir a can of whitewall tire paint. This is a non-water-based paint that is specially formulated to cover a rubber tire. Use your paint brush to paint the entire surface of the tire between the areas of your masking tape. Try to paint evenly, but do not be surprised if some of the paint soaks into the tire, leaving your with a slightly splotchy-looking paint job. Allow the paint to dry thoroughly, following the instructions on the can of paint.


6. Clean your brush in turpentine while waiting for the paint to dry. Water will not clean whitewall tire paint. Allow your brush to dry.


7. Apply a second coat of whitewall paint once the first coat has dried. Allow the second coat to dry and determine whether you need a third coat or not. Allow the final coat of paint to dry thoroughly before removing all of the masking tape and mounting the tire back on your vehicle.









Related posts



    Paint Lexan PlasticLexan plastic is a very hard and virtually unbreakable type of plastic polymer used in the production of a variety of items including astronaut helmets, motorcycle and safety he...
    Painting any room in your house can be an exhausting but refreshing experience all at once. New paint adds a clean look to the room, even if it's your utility room. Utility rooms are used for many...
    Create a welcoming entryway to your home with a red door.A brightly colored front door creates a welcoming entrance, says Jill Blake, author of "Healthy Home," and a front door painted r...
    Painting your tile floor can give it a whole new look.Over the course of time, tile can begin to get worn out in its appearance. Whether it's a buildup of dirt and grime, or cracks or broken tiles...
    Faded auto paint jobs have been around for several decades. This type of paint job was very popular in the early 1990's, even showing up from the factory on some trucks. A faded paint job consists...