Removing paint with chemicals.
Although numerous chemicals and paint removal agents are available in hardware stores, "paint strippers" or chemicals that are used to remove paint fall under two main categories: SBS or solvent-based strippers and CBS or caustic-based strippers. The most common chemicals and solvents used to remove paint include methylene chloride, acetone, toluene, methanol, N-methyl-pyrrolidone, sodium hydroxide and ammonia hydroxide. Other paint removing chemical solvents include isopropyl alcohol, acetone, lacquer thinner and epoxy.
Caustics
This category of paint removal chemicals consists mainly of sodium hydroxide. Considered environmentally friendly and non-toxic, these paint removers take anywhere from 12 to 42 hours to work. They effectively remove a wide range of paint coatings, including older (calcimine paints and milk) and newer finishes. They cannot be used to remove paint from galvanized steel, magnesium stainless or aluminum.
Because of its relative slow response time, this group of chemicals is used as a last resort to remove stubborn paint.
Toluenelmethanol
This category of chemicals effectively removes varnishes, lacquer and shellac. These chemicals work well to remove newer paint, but are not as effective against the older coatings. Their main drawback is their flammability, making their use a potential hazard. One spark is all it takes to cause a fire. Toluenelmethanol chemicals are used scarcely and only in controlled environments.
Methylene Chloride (MC)
Methylene chloride is the backbone of the paint removal industry. It effectively delaminates layers of paint instead of liquefying them, as other chemicals typically do. Methylene chloride-based paint removal agents are available in gel and liquid form, with the gel version used as the primary paint removal and the liquid as the final wash.
The major and significant drawback of methylene chloride is its health risks. The U.S. Consumer Product Safety Commission has formally classified it as a carcinogen and the Environmental Protection Agency has classified it as a hazardous air pollutant.
N-Methyl-Pyrrolidone (NMP)
This group of paint removing chemicals was introduced to address the disadvantages and health hazards of existing paint stripping chemicals available. They have virtually no health risks but are slow in effect. They can take anywhere from 12 hours to an entire week to remove paint, although initial effects are visible within the first 24 hours. Paint removals based on NMP are effective in stripping surfaces from old, stubborn paints, as they are excellent in removing multiple layers of paint. Their major drawback is their price, which is approximately three to five times that of other paint removal agents.
Acetone, Methanol and Toluene (ATM)
This group of chemicals is typically bunched together to remove paint. This highly flammable group effectively dissolves paint from the top layer down. This least expensive paint removing mixture should be avoided in closed spaces or those with poor ventilation.
Related posts
Paint can be removed from concrete with a power washer.Whether your concrete steps have been painted for years or you recently painted them and dislike the color or appearance, the process for rem...
Old, peeling paint should be removed before applying another finish.Lap wood siding is a widely used building material that protects the underlying structure of your house from rain, snow and the...
Most homeowners at one time or another find themselves faced with having to remove paint from walls, furniture or other surfaces. Most commercial paint strippers use toxic chemicals that are harsh...
Canvas awnings are difficult to paint because of the preparation and weather conditions involved. The canvas must be thoroughly cleaned and stretched before painting--some painters use special fil...
Strip layers of poorly applied paint before finishing a surface.The world's ablaze with the concept of going green. Heeding environmental activists' warnings about global warming, carbon emissions...
