Stucco is commonly used on exterior walls.
Synthetic stucco is often used as a special siding for buildings to help protect the surface, especially in high-heat areas of the country. This material is made of multiple layers of a fiberglass mesh, with another layer of foam insulating board. The final outer layer is the synthetic stucco. Usually, the final layer comes in a variety of colors, but over time, as with anything in direct sunlight, stucco has a tendency to fade. Repainting the stucco restores its original color.
Instructions
1. Inspect the surface and look for any hairline or larger cracks that may have occurred over time. Inspect the area of the surface mainly around windows, doors and other locations where you have painted before. Use the caulking gun and caulk to seal any cracks.
2. Clean the surface you want to paint with the power washer. Use a large, open-faced water tip to clean the surface. A smaller tip can damage the stucco. Stucco is much softer than other building materials and can crack easily. Once you've washed the area, allow the surface to dry between 48 to 72 hours before applying paint.
3. Inspect the surface again for any areas that may need to be repaired. Use the stucco patching material and fill in the areas. Smooth the mixture into the cracks and massage evenly until the surface is sealed. Let the patches dry for at least eight to 10 hours.
4. Apply a single coat of the primer to the stucco using a sponge foam paint brush. You can use a hand roller to make sure the primer covers the area entirely. Using a sprayer may not apply the primer completely, especially if the wind is blowing.
5. Apply at least two coats of water-based paint evenly to the stucco siding. Allow between eight to 10 hours of drying time between each coat. Applying two coats to the stucco covers the surface better and provides a thicker level of protection.
Related posts
When synthetic stucco fades, it can be stained or painted any color.Synthetic stucco, or EIFS (exterior insulation finish systems), is a composite siding made up of layers of fiberglass mesh, foam...
Read the safety guide on the side of the ladder .Alter the appearance of a rock facade on your house by refinishing it with paint. Before you get started, condition the faca...
Stucco is a textured surface generally created by a mixture of sand with a binder. It is applied to flat walls to provide a more interesting texture. It's very easy to paint over, and you don't ne...
Use the right materials when you paint stucco.A stucco fireplace, with its highly textured surface, requires the right preparation, tools and technique when you paint it. If the fireplace is brand...
The consistancy of stucco has kept many buildings from being painted.Stucco is a mixture of concrete and sand poured over wire. If the mixture isn't just right, it will affect the texture of the w...
